Skip to content Skip to sidebar Skip to footer

[ENG VERSION] The Easiest way to Full Unlocking & Root STB FIBERHOME HG680 - P

What is Android TV? Is Android TV having any benefit for us?. I'd say that Android TV is a mobile that designed for online streaming. Android TV is an OS, Android basis same goes with others smartphone, It could be used for monitoring CCTV, playing games online, watching K-drama, or anything else. Even you can use it for browsing or social media. But, if you want to do that, you have to UNLOCK or ROOT Android TV for doing a Full Access like on a smartphone. Here I use STB HG680-P for unlocking and root the STB.

After unlocking the STB, not only you've succeeded to do access like a smartphone., but also could install so many applications on Android. For example Facebook, WhatsApp, Chrome, etc. Okay, before we Unlocking & Root STB HG680-P, You have to download these tools below :

After all files are downloaded, follow the steps below :

1. We have to install "USB Burning Tool" first. And then, open "USB Burning Tool" and find firmware DTB then click open, don't forget to uncheck "Erase boot loader" so that the boulder can't be loose.

Note : Why you should use DTB? It could maintain the logo to still look good. It is very suitable for people who interested in making a logo or video booting by themselves.


2. And then, put "USB male to male to Laptop and STB HG680 - P at "USB2" not at "USB1" like the example below, and then, Start.



3. Just wait until the process finished and it will appear 100% Burning successful. And then, stop, take a USB cable male to male from STB HG680 - P.



4. Next, open "USB Burning Tool", search file pulpstone by Fuad then open.


5. The next step, click Start. Be careful! Don't check "Erase bootloader" !. And we put a USB male to male at STB HG680 - P in "USB2's part, wait until Burning process finished.



6. After that, take off USB male to male from STB HG680 - P and we are doing to update the firmware. Then we turn on STB HG680 - P and put in HDMI cable at the TV wait until the menu is appearing.

7. Enter "All apps" and we go to "setting"and choose "network" make sure you have connected to the wifi / LAN. Here I use wifi for getting an IP address.


8. If it has connected, open folder "ROOT STB HG680 - P" then choose the file "HG680 - P-inisalisasi-by-007.bat" click on the right of the mouse then choose edit and we change IP address based on IP address STB that have connected to your wifi / LAN, then SAVE or Ctrl + S.


9. Running the file. Click on the left of the mouse twice or enter and wait until the notification below appears.



10. Check-in STB. Is there a notice like a picture below? Make sure to checklist "Allow" then click OK.


11. Open "cmd-here"  follow the steps. Make sure you have installed the superSU application on your flash disk. Don't forget to extract the app. After that, put in an STB HG680 - P.


adb shell
ls /storage 

12. Then, see the ID of our flash disk. And, ready for the next step.


13. Change the Flash Disk ID based on the number that you have done at STB HG680 - P.

mount -o rw,remount /system
cp /storage/98E6-CCAC/SuperSU/armv7/su /system/xbin
chmod 4751 /system/xbin/su
cp /storage/98E6-CCAC/SuperSU/common/Superuser.apk /system/app
chmod 0644 /system/app/Superuser.apk
reboot


14. Just wait until STB HG680 - P shows the menu, and we have to connect by click file "HG680 - P-initalitation-by-007.bat" twice then wait till connected and follow the steps.

adb shell
mount -o rw,remount /system
su --install
su --daemon


15. After that, open the menu in STB, search superSU, and then you will find the notice below. Click "next" and the "normal" and re-boot.




16. Your STB HG680 - P is done and ready to use in root mode.

Thus this article I made, if you feel difficult please comment below yes ... so many and thank you.

Post a Comment for "[ENG VERSION] The Easiest way to Full Unlocking & Root STB FIBERHOME HG680 - P"